Disposable Latex gloves They are a type of glove, different from ordinary gloves, made of latex. They can be used in household, industrial, medical, and beauty industries and are essential hand protection products. Disposable latex gloves are made from natural latex and other fine additives. The product has undergone special surface treatment for comfortable wear. Widely used in industrial and agricultural production, medical care, and daily life. The rubber is sliced by a rubber mixer and then sent to a sol tank to mix the sol with gasoline. The sol is emulsified and prepared, then pumped into the latex intermediate tank. The rubber solution dissolved in gasoline is sent out from the top of the distillation tower and distilled by heating with steam. The light component gasoline is heated into the gas phase, and the gasoline gas is mixed and cooled with cold water in the oil-gas cooler. The mixture enters the oil-water separator, and the oil and water are separated. The upper gasoline is recovered, and the lower water is pumped to the cooling tower for cooling, and then the gas gasoline in the distillation tower is cooled; the latex from the distillation tower is sent to the latex mixing cylinder, stirred and adjusted according to its own pressure, and then separated into glove raw material latex by a centrifuge, and then colored and filtered for later use.

Latex gloves are washed with acid, alkali, and water. The washed mold is heated by immersion in hot water and then immersed in a coagulant for drying and impregnation. After dipping, it is sent to a drying oven for preliminary drying, a fiber inner liner is added, washed with hot water, and then sent to a vulcanization oven for vulcanization and shaping. After demolding, the gloves are inflated, low-temperature setting, medium-temperature drying, water washing, dehydration drying, packaging, and then sent to the finished product warehouse.
A good pair of latex gloves should have a clean and beautiful surface, be yellow, and have good curling, high tensile strength, and airtightness.
It's a little difficult to test latex gloves by hand; professional equipment is needed. All we can do is look at the color. White, white latex gloves are full of additives. The whiter the color, the more additives, and the more additives, the less tensile strength. However, many gloves with yellow pigments can change the color of the gloves, so this is not entirely reliable. Finally, be sure to look at the degree of wrinkling of the gloves. Like a pair of latex gloves. Opened from the packaging, gloves with high rubber content will not wrinkle, and the lower the rubber content, the more wrinkles. If a pair of gloves is wrinkled and white, the amount of rubber inside is very low. The reason we all use latex is that latex is flexible and nothing is better than latex.
Latex glove measurement methods:
Length: The distance from the fingertip to the outer edge of the wrist.
Width: The widest point at the horizontal position of the thumb and little finger.
Thickness: The middle finger and palm (double layer) can be measured separately. For arbitration testing, the single-layer thickness can be measured by cutting the glove.
Disposable latex gloves are divided into smooth latex gloves and notched latex gloves. It is made of natural rubber and other additives through a special process and is powder-free. This product does not contain any additives. Harmless tension, good adhesion, flexible use, and has the following advantages: 100% pure original color latex has good elasticity and is easy to wear. Comfortable to wear, does not oxidize, silicone oil, fat, and salt.
Learn more Nanyang gloves, industrial gloves, dishwashing gloves For more information, please follow us.

Email:
huanan@nh-huanan.com

Service Tel:
+86-0758-2652726

Company Address:Beishui Development Zone, Qizhou, Yong'an Town, Dinghu District, Zhaoqing City, Guangdong Province