Below are some tips about Cowhide gloves Welcome everyone to take a look.

Key points for using cowhide gloves: Workers should wear gloves on both hands, ensuring fingers and gloves fit well, and sleeves should be worn over the cuffs. Contaminated cowhide gloves can be cleaned with soap and water below 60 degrees Celsius. For tar-like substances, the substance must remain on the gloves for use. When cleaning, use a special cleaner for insulated rubber products. Rubber water, gasoline, etc. cannot be used to remove contamination. Otherwise, it will damage the heat preservation performance of the cowhide gloves. When wet or after cleaning, the gloves should be completely dried and stored with smooth lime. Mix the cowhide gloves and materials. Do not mix cowhide gloves with oil or corrosive substances.

　　Implementation standards for cowhide gloves: After purchasing gloves, if users encounter rain, dampness, mildew, or other abnormal changes during transportation and storage, they should go to the court inspection department for electrical performance inspection and testing. Expansion inspection is required before use. If any damage is found, they cannot be used. During work, to prevent accidents, the sleeves must be tucked in. After use, the inner and outer dirt should be wiped clean until dry. Spread talcum powder to flatten and prevent compression damage. Do not place them on the floor. They should be stored in a dry and ventilated warehouse with an indoor temperature of -15~30℃ and a relative humidity of 50%~80%, away from heat sources, and more than 20 centimeters above the ground and walls. Do not be affected by acid, alkali, oil, and other secondary food products. Place them indoors, avoid direct sunlight, and do not place them on the ground.

　　What are the important indicators that determine cowhide gloves? The purpose of wearing insulated gloves is to prevent electric shock injuries, mainly because the human body conducts current. Therefore, the protective performance of insulated gloves mainly depends on the leakage current passing through under a certain voltage. Leakage current within the safe current value is safe; otherwise, it is unsafe. Applying a certain voltage will not cause penetration, but excessive leakage current will cause harm to the human body.

　　Preventive testing of cowhide gloves is a strict regulation in the power industry to ensure personal safety. From the perspective of safety first, due to aging or long-term changes in storage conditions, users need to conduct preventive testing before use. Cowhide gloves that have exceeded their shelf life must pass preventive testing before use.

　　What should be noted when wearing cowhide gloves on rainy days? When electricians work, sometimes the labor intensity increases, or the weather and temperature rise, and sometimes limbs accidentally touch walls or grounded equipment, causing electric shock due to leakage. Therefore, even when wearing insulated boots, precautions should be taken to prevent other parts of the limbs from grounding during work. In the rainy season, wear insulated boots or cowhide gloves, but also necessary rain gear. Prevent moisture conduction in the insulated protection area from causing limb electric shock.

　　If you want to learn more Household gloves, labor protection gloves, Nanyang gloves You can follow us.

Email:
huanan@nh-huanan.com

Service Tel:
+86-0758-2652726

Company Address:Beishui Development Zone, Qizhou, Yong'an Town, Dinghu District, Zhaoqing City, Guangdong Province