Leather gloves Key points for use: Workers should wear gloves on both hands, ensuring fingers are properly inserted into the finger holes and sleeves are worn inside the gloves. Contaminated leather gloves can be washed with soap and water below 60°C. Gloves with substances like tar or paint residue should not be used before cleaning. Use a special cleaning agent for insulated rubber products. Do not use rubber water, gasoline, etc., to remove contaminants, as this will damage the insulation performance of the leather gloves. Damp or wet gloves after washing should be thoroughly dried and coated with lubricating lime for storage. Mix leather gloves with materials appropriately. Do not mix leather gloves with oils or corrosive substances.

Leather glove execution standard: After purchasing gloves, if they encounter rain, dampness, mildew, or other abnormalities during transportation and storage, they should be inspected by a court inspection agency for electrical performance testing. Expansion checks are required before use. If any damage is found, they cannot be used. During work, to prevent accidents, sleeves must be inserted into the openings. After use, clean the inside and outside until dry, sprinkle with talcum powder to keep them flat, avoid compression damage, and do not place them on the floor. They should be stored in a dry, well-ventilated indoor environment with a temperature of -15°C to 30°C and a relative humidity of 50% to 80%, away from heat sources, and at least 20 cm from the ground and walls. Avoid contact with acids, alkalis, oils, and other substances. Avoid direct sunlight and do not place them on the ground. Preventative testing should be conducted every 6 months.
What are the key indicators determining the quality of leather gloves? The purpose of wearing extended cuffs is to prevent electric shock injuries, primarily because the human body conducts electricity. Therefore, the quality of the insulation protection of the extended cuffs mainly depends on the magnitude of the leakage current passing through under a certain voltage. Leakage current within the safe current range is safe; otherwise, it is not. Applying a certain voltage will not cause penetration, but excessive leakage current can harm the human body.
Preventive testing of leather gloves is required: Preventive testing is a strict regulation in the power industry to ensure personal safety. Extended cuffs have a relatively long service life, but changes caused by aging or storage conditions over time necessitate preventive testing before use, prioritizing safety. Leather gloves that have exceeded their shelf life must pass preventive testing before use.
Precautions for outdoor work in rainy weather while wearing leather gloves: During electrical work, labor intensity or ambient temperature may increase, and accidental contact of limbs with walls or grounded equipment may cause electric shock. Therefore, even when wearing insulated boots, precautions must be taken to prevent other parts of the limbs from grounding. During the rainy season, wear insulated boots and leather gloves, but also have necessary rain gear to prevent electric shock due to moisture conduction in the insulation protection area.
Learn more Nanyang gloves, dishwashing gloves, industrial gloves For more information, please follow us.

Email:
huanan@nh-huanan.com

Service Tel:
+86-0758-2652726

Company Address:Beishui Development Zone, Qizhou, Yong'an Town, Dinghu District, Zhaoqing City, Guangdong Province